This is an equalizer. It can also function as a volume booster, which is great. I believe it is a digital effect. It cannot be edited via computer. It is a floor pedal,so it's not rackable. It has input and output as well as connector for 9v/dc power supply.

The general configuration is your standard 7-band equalizer. I don't know anything about equalizers and setting them for specific applications. This is where the manual/instructions came in. I made it easy to tweak the slider controls and get various tones from the unit. There are 3 sample presets: barb-eq for blues or 70's rock, scooped for metal, and curly Q for God knows what?

This unit provides top notch equalization for under $35. When you stomp on it and engage it's effect, it is almost like you just engaged a sonic maximizer. It makes your tone jump to life and just improves its presence that much more. It also works great as a volume booster for solos. Just slide the level to over 1/2 all the way to full, then stomp on it when you're solo begins! There's nothing I really don't like about the tones from this thing. (Aside from perhaps the "Curly Q" setting, which I'm still not sure what it's for.)

This is a pure distortion pedal. You can get overdrive out of it, there are even presets for it. However, I believe this pedal is specifically tailored for hard, heavy, driving distortion. The heavier, the better. It is a digital unit and cannot be edited via computer. It is a floor pedal, so it is not rackable. The unit has one input and two outputs. One output is for going to an amp. The other is a cabinet modeler that allows you to go straight into the mixing board.

Configuration is simple. It has four knobs : level, low, mid and high. As digitech says, they've set the gain on 11 and ripped off the knob ! Thus the lack of a gain knob on this unit. Sounds/effects editing is very easy and the clear, colorful manual makes it even easier. There are not only presets for just this unit, but the manual also shows how you can combine it with other effects to get a solo tone.

This pedal really only serves one purpose....it's a death metal pedal, just like the name says! As such, it sound greats for death, trash, nu-metal, and even heavy metal! I put this thing through a Fender Twin and it was palm muting hell (or heaven depending on your opinion.) It is great for heavy rhythm grind. Unfortunately, because the treble is so harsh, I don't feel this is a great pedal for soloing. The manual has a sample setup that has this pedal chained to a delay and a chorus for a smoother soloing sound. When I mimic this set up, it sounds a little better, but the treble is still too harsh in my opinion, even with the delay and chorus.

This is a straightforward overdrive/distortion pedal. It actually has a mode for both overdrive and distortion. I believe it is digital. It cannot be edit via computer. It has input and output, as well as connector for 9v/dc power supply. It is a floor pedal, so it is not rackable. It has volume, gain, treble, mid, bass, and frequency in stacked knobs.

General configuration is simple. Even though certain knobs are stacked on top of each other, it's not really hard to figure this unit out. This pedal can get a large range of sound or effects and editing is easy. I bought this used, so I don't have a manual. However, if you go on the Marshall website, it has some pretty cool presets that you can set up.

You can get some tones that are fairly close to several Marshall amp models with this unit. For distorted sounds, I have as much as put this through a Fender Twin, and it sounds huge and amazing. It's like having a Marshall amp with the purity and thumping low end of the Fender clean. The distortion mode on this pedal has a ton of bass to it, which I like for solos. However, in order to switch back to rhythm sounds, you would have to bend down and switch the mode to the overdrive mode, which is not very practical in a live setting. The same goes for switching from rhythm in the overdrive mode to playing a solo in the distortion mode. So basically, you need to have another distortion pedal or a dirty amp for playing rhythm, then kick on this pedal in the distortion mode. Or you have to use this pedal on the overdrive mode for rhythm, then have another pedal as a gain booster, such as a DOD YJM 368 when you go into a solo. So it's pretty impractical, when ideally, you should only need this pedal to switch between rhythm and soloing, and back. Since I have a multi-effects pedal as well as my DOD preamp/gain booster, this pedal only gets used for specific applications.

This is a straightforward preamp overdrive. It can be used by itself as an overdrive pedal. (I don't like the sound that much when used in this way.) It can also be used as a gain/preamp booster, i.e. in front of a dirty amp or in front of a distortion/overdrive pedal. I believe it is digital. To my knowledge, it cannot be edited via computer. There is an input and output, as well as an input for 9v/dc power supply. This is a floor pedal, so it is not rackable.

Configuration is very simple, with just two knobs: level and gain. Getting the intended effects is really easy. Turn the gain all the way up, then adjust the level to your liking, and you're done with presets. I think I have the manual, but I don't think it was very useful. Luckily, you don't really need it.

As I said earlier, as an overdrive by itself, I am not so impressed by this pedal. However, when I put it after my noise suppressor and before any distortion pedals, it makes a wonderful, screaming preamp booster. I stomp on this baby primarily for solos, either with a distortion/overdrive pedal already engaged, or when the amp I'm using has it's drive/distortion pedal kicked in. It gives you days and days of endless sustain. I can also do fast,long solos without wasting all of my hard earned energy trying to press the strings so hard to get great tone and sustain. The only things I don't like about this pedal, I fixed by buying additional specialized pedals. It is very noisy, especially with the gain turned up. A noise suppressor fixes that. I also wish that it would boost volume when engaged, precisely because I use it for solos, but this unit does not give much of a volume boost when engaged. So I bought an equalizer that I can engage along side of it when it's time to solo.

This is a straight noise suppressor with really only one purpose: and that's to suppress noise ! I believe it is digital. It cannot be edited via computer. This is a floor pedal, so it is not rackable. This unit has an input and an output for going from the guitar to the rest of your guitar pedal chain then to the amp. However, it also has additional send and return inputs and outputs, which essentially turns your pedal rig into an effects loop. This unit is definitely most effective when utilized in this way.

The general configuration/setup is simple. Sound/effects editing is easy. It's got two modes: one to mute your signal and the other is the actual noise reduction mode. It's got two knobs, threshold and decay. You need to tweak these two knobs to get the maximum, most effective noise reduction possible without compromising your tone and sustain, which the unit can do if you set the threshold too high. I bought this used, so I don't have a manual. However, I don't think it's necessary.

As said, this effect is for one thing and one thing alone. It is for noise suppression. It does what it does very well. It reduces hum, feedback, and other noise very well. I own a DOD Yngwie Malmsteen preamp overdrive pedal, and Yngwie himself will tell you that that little unit is noisy. When you put this pedal before the DOD in your chain, utilize the effects loop function. You can hear the wonderful sustain from the DOD without the annoying noise, as long as you don't set the threshold too high, thanks to the Boss Noise Suppressor.

55 watts rms per chanel
3 way / 3 speaker
woofer 10"

Multi-effects pedal with 42 programmable / editable presets. I believe this is a digital device. The main effects categories this unit has includes compressor/limiter, wah, "drive", Equalizer, noise suppressor, pitch modulation, delay, and reverb. All effects can be used at the same time, which is great. Within the modulation category, you can set the unit for flange, chorus, phaser, tremolo, just to name a few. You can also choose between 4 different amp models as well as an additional 7 types of "drive." Connections are a standard input and output as well as a 9volt connector for power supply. The output also doubles as a headphone in, which is cool. Unfortunately, the presets/effects cannot be edited via a Mac/PC editor utility program. This is designed as a floor pedal, so it is not rackable.

The actual face of the pedal is easy to understand and utilize. As far as actually navigating the presets in order to tweak them or modify them,the unit takes some playing around with. This is where the manual, though long, comes in. The manual is very self-explanatory and explains the operation simply and easily. The only reason the manual is so long and why it takes a long time to figure out the extent of this unit's capabilities is because there are so many options/sounds that can be coaxed out of this little unit.

For being digital, the effects on this little unit are very solid, and many of them are sufficiently realistic. For example, I feel it does the Fender Twin very well. Use that setting on any amp, close your eyes, and you'd swear there's a Fender Twin right beside you. If you want a Mesa or a Marshall, you can have something darn close to them. There is a Soldano lead setting, and a psychedelic Jimmy Hendrix sound. The standard wah sound is pretty spot on as well. If you want to sound like standard Eddie Van Halen, or if you want his "unchained" flanging sound, this unit can give you both, and is pretty much right on the money. There is a tweed preset with a cool tremolo effect that sounds great for country, western, or blues. If I had to name some cons, the acoustic modeler is not that great. There are also 2 entire "banks" or sets of 6 presets that are kind of cheesy sounding for the most part. But the great news is that these can be edited, so you have room to create your own unique presets. Overall, I've got so many sounds at my disposal with just this one unit. Much cheaper than buying several pedals, or even worse, several amps. I use this unit only with my Ibanez RG 120, and it is perfect.

This guitar was made in China. It has 22 frets and is a straight acoustic guitar. (i.e. no electrical components.) The bridge is stock plastic (?) bridge. No setting controls, as it is a straight acoustic. It has a mahogany neck and a rosewood fretboard.

The back of the neck on this guitar is nice and smooth and let's your hand slide easily up and down the neck. Because the guitar needs a set-up, the action is not that great. So I use this guitar as a practice guitar to strengthen my hands and improve my picking and fretting accuracy. As with most dreadnought style acoustics, it is difficult to get to the top notes/last frets of this guitar. I guess if you want to play high note acoustic solos, you need to get an electric acoustic with a cutaway. This guitar is light and easy to move around with. It's not so big that it's not cumbersome to play, which is great. At this price point, this acoustic sounds great. When playing chords, the sound coming out of the sound-hole is big, full and bright. It sounds better than a few thousand dollar acoustic guitars that I've played, in my opinion.

I play for a worship service, and sometimes we play some acoustic tunes. I haven't used this acoustic on stage yet, but I think it would sound great either miked or if I get a pickup for it. Like I said, I love the sound of chords coming out of this thing. Because of the action, playing single notes don't sound that great. You've got to focus on fretting properly instead of zoning in on your vibrato, etc.